Brocade BR-AP065060010US 650 Sgl Radio Int Ant Us

650 SGL RADIO INT ANT US
For remote offices and smaller enterprises, lowering the costs of mobility capabilities must be balanced with the need for secure and continuously reliable data transmission. The Brocade Mobility 650 Access Point (AP), a thin (dependent) multipurpose AP - meets all of these needs. Designed to lower the cost of deploying and operating a secure, reliable 802.11n wireless LAN (WLAN) in small enterprises or remote office facilities, this highly efficient AP offers simultaneous WLAN access and sensing, remote over-the-air help-desk support - and the comprehensive wireless intrusion prevention features that nimble organizations require.
Brocade Mobility 650 Wireless LAN Access Point Single Radio - Wireless access point - 802.11 a/b/g/n (draft 2.0) - DC power
*
MAIN SPECIFICATIONS
Product Description Brocade Mobility 650 Wireless LAN Access Point Single Radio - wireless access point
Device Type Wireless access point
Enclosure Type External
Dimensions (WxDxH) 7.5 in x 9.5 in x 1.9 in
Weight 2 lbs
Localization United States
Data Link Protocol IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n (draft 2.0)
Features Firewall protection, VLAN support, Intrusion Prevention System (IPS), MIMO technology, wall mountable, Quality of Service (QoS)
Power Over Ethernet (PoE) Supported Yes
Power DC 48 V
General
Device Type Wireless access point
Width 7.5 in
Depth 9.5 in
Height 1.9 in
Weight 2 lbs
Localization United States
Networking
Form Factor External
Connectivity Technology Wireless
Data Transfer Rate 300 Mbps
Data Link Protocol IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n (draft 2.0)
Spread Spectrum Method OFDM, DSSS
Status Indicators Power, active, error, status
Features Firewall protection, VLAN support, Intrusion Prevention System (IPS), MIMO technology, wall mountable, Quality of Service (QoS)
Authentication Method RADIUS
Compliant Standards IEEE 802.11b, IEEE 802.11a, IEEE 802.3af, IEEE 802.11g, IEEE 802.11n (draft 2.0)
Antenna
Antenna Internal integrated
Gain Level 4.8 dBi
Expansion / Connectivity
Interfaces 1 x network - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45
Miscellaneous
Mounting Kit Included
Compliant Standards Plug and Play, CE, TUV, cUL, EN 60950, UL 60950, UL 2043, FCC, TELEC
Power
Power Over Ethernet (PoE) Supported Yes
Voltage Required DC 48 V
Power Consumption Operational 12.95 Watt
Environmental Parameters
Min Operating Temperature 32 °F
Max Operating Temperature 122 °F
Humidity Range Operating 5 - 95% (non-condensing)