Supermicro AS-1123US-TR4 As-1123us-tr4

Motherboard
H11DSU-iN Processor/Chipset
CPU
Dual AMD EPYC 7001/7002 series Processors
( Board revision 2.x required)
Socket SP3
Supports CPU TDP 225W / cTDP up to 240W
Cores
Up to 32 Cores (Board revision 1.x + 7001 Processors)
Up to 64 Cores (Board revision 2.x + 7002 Processors)
Chipset
System on Chip (SoC) System Memory
Memory Capacity
32 DIMM slots
Supports up to 4TB Registered ECC DDR4 2666MHz SDRAM (7001 Processors)
Supports up to 8TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required + 7002 Processors)
8-channel memory bus
Memory Type
DDR4 2666 MHz Registered ECC, 240-pin gold-plated DIMMs (7001 Processors)
DDR4 3200 MHz Registered ECC, 240-pin gold-plated DIMMs (Board revision 2.x required + 7002 Processors)
DIMM Sizes
4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB
( Board revision 2.x required + 7002 Processors)
Memory Voltage
1.2V
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory) On-Board Devices
VGA
ASPEED AST2500 BMC Expansion Slots
1U
2 PCI-E x16 (FH/HL 9.5") slots
2 PCI-E x8 (LP) slot (1 LP, 1 internal LP)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.) Input / Output
SATA
10 SATA3 (6 Gbps) ports
LAN
Quad Gigabit LAN ports
1 RJ45 Dedicated IPMI LAN port
USB
5 USB 3.0 ports (2 rear + 2 via header + 1 Type A)
VGA
1 VGA port
SAS
8 SAS3 ports support via optional Add-on Card
NVMe
2 NVMe support with optional cables
Others
1 COM port (rear)
2 SATA DOM power connector
TPM 1.2 header System BIOS
BIOS Type
AMI 128Mb SPI Flash EEPROM
BIOS Features
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 5.1
USB Keyboard Support
SMBIOS 3.1.1 Chassis
Form Factor
1U
Model
CSE-119UTS-R1K02P-T Front Panel
Buttons
Power On/Off button
System Reset button
LEDs
Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED / Fan fail LED /
UID LED Drive Bays
Hot-swap
10 2.5" hot-swap SATA3
or 8 SATA3 + 2 NVMe drive bays (optional) Backplane
HDD Backplane
Supports 10 SATA3 or 8 SATA3 + 2NVMe or 8 SAS3 + 2 SATA3 HDD System Cooling
Fans
8 heavy-duty PWM fans with optimal fan speed control
Air Shroud
2 Air Shroud Power Supply
1000W Redundant Power Supplies with PMBus
Total Output Power
800W/1000W
Dimension (W x H x L)
73.5 x 40 x 203 mm
Input
100-127Vac / 9.8 - 7A / 50-60Hz
200-240Vac / 7 - 5A / 50-60Hz
200-240Vdc / 7 - 5A (for CCC only)
+12V
Max: 66.7A / Min: 0A (100-127Vac)
Max: 83A / Min: 0A (200-240Vac)
Max: 83A / Min: 0A (200-240Vdc)
12Vsb
Max: 2.1A / Min: 0A
Output Type
25 Pairs Gold Finger Connector
Certification
Titanium Level PC Health Monitoring
CPU
Monitors CPU Core Voltages, +12V, +3.3V, +5V, +5V standby, 3.3V standby, VBAT
CPU switching voltage regulator
FAN
Up to 8-fan status tachometer monitoring
Up to eight 4-pin fan headers
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment
CPU Thermal Trip Support
Thermal control for 8x Fan connectors
I2C Temperature Sensing Logic
LED
CPU / System Overheat LED
Other Features
Chassis Intrusion Detection
Chassis Intrusion Header Operating Environment / Compliance
RoHS
RoHS Compliant
Environmental Spec.
Operating Temperature:
10^oC to 35^oC (50^oF to 95^oF)
Non-operating Temperature:
-40^oC to 70^oC (-40^oF to 158^oF)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing) Item Dimension (L"xW"xH")
28 x 18 x 2

Weight
41 lbs

Warranty Information
1 Year