Supermicro MBD-X10DAL-I-O(3YR) Motherboard Mbd-x10dal-i-o(3yr) Xeon E5-2600 V3 Lga2011 Socket R3 C612 Ddr4 Sata Pci Express Atx Retail

Processor/Cache
CPU:
- Intel Xeon processor E5-2600 v3 family (up to 160W TDP)
- Dual Socket R3 (LGA 2011)
Cores/Cache: Up to 18 Cores / Up to 45MB Cache
System Bus: QPI Up to 9.6 GT/s System Memory
Memory Capacity:
- 8x 288-pin DDR4 DIMM slots
- Up to 512GB ECC LRDIMM, 256GB ECC RDIMM
Memory Type: 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes:
- RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
Memory Voltage: 1.2V
Error Detection:
- Corrects single-bit errors On-Board Devices
Chipset: Intel C612 Chipset
AHCI SATA: SATA3 (6Gbps) RAID 0, 1, 5, 10
SCU SATA: SATA3 (6Gbps) RAID 0, 1, 5, 10
Network Controllers:
- Intel i210 Dual Port Gigabit Ethernet
- Supports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Audio: RealTek ALC888 7.1 High Definition Audio with S/PDIF header Input/Output
SATA: 10x SATA3 (6Gbps) ports
LAN:
- 2x RJ45 Gigabit Ethernet LAN ports
USB:
- 6x USB 3.0 ports (4 rear + 2 via header)
- 3x USB 2.0 ports (2 via header + 1 Type A)
Audio: 7.1 HD Audio with optical S/PDIF
Serial Port/Header: 1x COM Port (1 header)
SuperDOM:
- 2x SuperDOM (Disk on Module) ports
TPM: 1x TPM 1.2 20-pin Header Expansion Slots
PCI-Express:
- 2x PCI-E 3.0 x16
1x PCI-E 3.0 x8 (in x16)
1x PCI-E 3.0 x4 (in x8)
1x PCI-E 2.0 x4 (in x8) System BIOs
BIOs Type:
128Mb SPI Flash EEPROM with AMI BIOS
BIOs Features:
- Plug and Play (PnP)
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1 Management
Software:
- Super Doctor 5
Watch Dog
Power Configurations:
- ACPI Power Management
- Power-on mode for AC power recovery PC Health Monitoring
Voltage:
- Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages
- 5 Phase-switching voltage regulator
FAN:
- 7x 4-pin fan headers (up to 7 fans)
- 7x fans with tachometer monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
Temperature:
- Monitoring for CPU and chassis environment
- CPU thermal trip Support
- Thermal Control for 7x Fan Connectors
- Thermal Monitor 2 (TM2) support
PECI
LED: CPU / System Overheat LED
Other Features:
- Chassis Intrusion Detection
- Chassis Intrusion Header
- SDDC Support
- RoHS Operating Environment
Operating Temperature Range: 10 C to 35 C (50 F to 95 F)
Non-Operating Temperature Range: -40 C to 70 C (-40 F to 158 F)
Operating Relative Humidity Range: 8% to 90% (Non-Condensing)
Non-Operating Relative Range: 5% to 95% (Non-Condensing) Form Factor
ATX Item Dimension (L"xW"xH")
12 x 10 x 1

Weight
5.00 lb

Warranty Information
3 Years