Maretron PTS-0-3PSI-02 0-3 Psi Submersible Pressure Transducer

0-3 PSI Submersible Pressure Transducer

This Maretron submersible pressure transducer is designed for accurate tank level indications, directly installable within the tank. Follow the provided instructions for seamless mounting and connecting to an NMEA 2000® network via a Maretron FPM100 Fluid Pressure Monitor. Maretron offers two installation methods: without a restraining tube or with one (sold separately).

Designed for tanks featuring a 5-hole SAE J1810 fitting, this transducer includes a mounting plate with a cord grip. Ensure the rounded hex section of the cord grip faces away from the transducer, securing it at the lowest point in the tank. With a flat-bottom tank, the transducer might shift slightly until secured, preventing rotation due to the cable's stiffness.

Mounting Instructions:

Connect the transducer wires to a free pressure monitoring channel: the red wire to the positive (+) terminal and the black wire to the negative (-) terminal of the channel. Using a Maretron DSM Series Display (firmware 1.4.7 or higher) or a compatible PC running Maretron’s N2KAnalyzer software (version 1.4.19 or higher), configure the connected channels on the FPM100.

After supplying power to the NMEA 2000 network, verify that the pressure channel displays a valid pressure reading.

Specifications:

• Operating Range: 0 to 3 PSI (0.207 bar)
• Depth Range (Water): 83.1” (2.11 m)
• Cable Length: 17 ft (5.18 m)
• Output: 4 – 20 mA current loop, loop powered
• Compatible Fluids: Diesel, Gasoline, Hydraulic Fluid, Fresh Water
• Operating Temperature: 14°F to 158°F (-10°C to 80°C)
• Response Time: 150ms
• Construction: 316L stainless steel body
• Weight: 24.8oz (703g)